Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 363 / 1192

CLI Reference IP Address Configuration Commands
Parameter
Description
Parameter Description
N/A N/A
Defaults
Disabled on the version higher than 10.2(3).
Command
Mode
Interface configuration mode.
Usage Guide Proxy ARP helps those hosts without routing message obtain MAC address of
other networks or subnet IP address. For example, a device receives an ARP
request. The IP addresses of request sender and receiver are in different networks.
However, the device that knows the routing of IP address of request receiver sends
ARP response, which is Ethernet MAC address of the device itself.
Configuration
Examples
The following is an example of enabling ARP on FastEthernet port 0/1:
interface fastEthernet 0/1
ip proxy-arp
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is not supported on the Layer 2 switch.
ip redirects
Use this command to allow the RGOS software to send an ICMP redirection
message in the interface configuration mode. The no form of this command is used
to disable the ICMP redirection function.
ip redirects
no ip redirects
Parameter
Description
Parameter Description
N/A N/A
Defaults Enabled.
Command
Mode
Interface configuration mode.
Usage Guide When the route is not optimum, it may make the device to receive packets through