Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 961 / 1192

CLI Reference Guide QoS Configuration Commands
Default
configuration By default, the physical port belongs to no virtual-group.
Command
mode Interface configuration mode.
Usage
guidelines
The member port joined the virtual group must be physical port or
Aggregate Port. The virtual group member ports must be in the same
line card(for the chassis-shaped switch) or in the same switch(for the
box-shaped switch). If the line card or switch has 48 ports, then all
member ports shall be distributed on the former 24 ports or the latter 24
ports.
Examples
The following example sets the interface gigabitEthernet 1/3 as the
member of virtual group 3:
Ruijie(config)# interface gigabitethernet 1/3
Ruijie(config-if)# virtual-group 3
Related
commands
Command Description
show
virtual-group
Show the virtual-group settings.
Platform
description
The software version must be RGOS10.1 and higher.
show class-map
Use this command to show the information of class maps.
show class-map [ class -name ]
Parameter
description
Parameter Description
class-name Name of the class map
Default
configuration All class maps are shown by default.
Command
mode Privileged EXEC mode.