Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 849 / 1192

CLI Reference NFPP Configuration Commands
sho
w
nfpp
ip-gu
ard
sum
mary
Show the configurations.
nfpp ip-guard isolate-period
Use this command to set the isolate period in the interface configuration mode.
nfpp ip-guard isolate-period { seconds | permanent }
Parameter
description
Parameter Description
seconds
Set the isolate period, in second. The
valid range is 0, or [30, 86400]. 0
indicates no isolation.
permanent
Permanent isolation.
Default
Settings By default, the isolate period is not configured.
Command
mode Interface configuration mode.
Usage
guidelines N/A
Examples
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp ip-guard isolate-period 180
Related
commands
Command Description
ip-guard
isolate-period
Set the global isolate period.
show nfpp
ip-guard summary
Show the configurations.