Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 867 / 1192

CLI Reference NFPP Configuration Commands
guidelines
Examples
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp define tcp isolate-period 180
Related
commands
Command Description
isolate-period Set the global isolate period.
show nfpp define
summary
Show the configurations.
nfpp define name policy
Use this command to set the local rate-limit threshold and the attack threshold.
nfpp define name policy { per-src-ip | per-src-mac | per-port } rate-limit-pps
attack-threshold-pps
Parameter
description
Parameter Description
per-src-ip
Set the attack threshold for each
source IP address.
per-port
Set the attack threshold for each
port.
rate-limit-pps
Set the rate-limit threshold with the
valid range of [1, 9999].
attack-threshold-pps
Set the attack threshold with the
valid range of [1, 9999].
Default
Settings
By default, the rate-limit threshold and the attack threshold are not
configured.
Command
mode Interface configuration mode.
Usage
guidelines
The attack threshold value shall be equal to or greater
than the rate-limit threshold.
Examples
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp define tcp policy per-src-ip 2 10