Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 960 / 1192

CLI Reference Guide QoS Configuration Commands
Parameter
description
Parameter Description
queue-id Specify the queue id.
sp Restore to the default value.
Default
configuration SP is not used.
Command
mode Global configuration mode.
Usage
guidelines
Use this command to enable the queue to use sp+wfq schedule
algorithm, on the condition that the queue uses wfq schedule
algorithm.
Examples
The following example enables the queue to use wfq schedule
algorithm:
Ruijie(config)# mls qos scheduler wfq
Ruijie(config)# show mls qos scheduler
The following example configures queue 1 and queue 3 to use SP:
Ruijie(config)# wfq-queue 1 sp
Ruijie(config)# wfq-queue 3 sp
Ruijie(config)# show running
Related
commands
Command Description
show mls qos
scheduler
Show QOS schedule method.
Platform
description
The software version must be RGOS10.1 and higher.
virtual-group
Use this command to configure a physical port or Aggregate port as the member port of a virtual group. Use the
no form of this command to remove the member attribute of a virtual group on the port.
virtual-group virtual-group-number
no virtual-group virtual-group-number
Parameter
description
Parameter Description
virtual-group-number Virtual group number, up to 128.