Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 394 / 1192

CLI Reference IPv6 Configuration Commands
to the default setting.
ipv6 nd ra-interval { seconds | min-max min_value max_value }
no ipv6 nd ra-interva l
Parameter
Description
Parameter Description
seconds Interval of sending the RA message in seconds, 3-1800s.
min-max
Maximum and minimum interval sending the RA message in seconds
min_value Minimum interval sending the RA message in seconds
max_value Maximum interval sending the RA message in seconds
Defaults 200s. The actual interval of sending the RA message will be fluctuated 20% based on 200s.
Command
Mode
Interface configuration mode.
Usage Guide If the device serves as the default device, the set interval shall not be longer than the lifetime of the
device. Besides, to ensure other devices along the link occupies network bandwidth while sending the
RA message, the actual interval for sending the RA message will be fluctuated 20% based on the set
value.
If the key word min-max is specified, the actual interval for sending the packet will be chosen
between the range of minimum value and maximum value.
Configuration
Examples
Ruijie(conifig-if)# ipv6 nd ra-interval 110
Ruijie(config-if)# ipv6 nd ra-interval min-max 110 120
Related
Commands
Command Description
show ipv6 interface
Show the interface information.
ipv6 nd ra-lifetime Set the lifetime of the device.
ipv6 nd ra-hoplimit Set the hopfcount of the RA message.
ipv6 nd ra-mtu
Set the MTU of the RA message.
Platform
Description
N/A
ipv6 nd ra-lifetime
Use this command to set the device lifetime of the RA sent on the interface. Use the no form of this
command to restore it to the default setting.
ipv6 nd ra-lifetime seconds
no ipv6 nd ra-lifetime
Parameter Parameter Description