Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 829 / 1192

CLI Reference NFPP Configuration Commands
Default
Settings By default, the isolate period is not configured.
Command
mode Interface configuration mode.
Usage
guidelines N/A
Examples
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp dhcpv6-guard isolate-period 180
Related
commands
Command Description
dhcpv6-guard
isolate-period
Set the global isolate period.
show nfpp
dhcpv6-guard
summary
Show the configurations.
nfpp dhcpv6-guard policy
Use this command to set the rate-limit threshold and the attack threshold.
nfpp dhcpv6-guard policy { per-src-mac | per-port } rate-limit-pps attack-threshold-pps
Parameter
description
Parameter Description
per-src-mac
Set the rate-limit threshold and the
attack threshold for each source
MAC address.
per-port
Set the rate-limit threshold and the
attack threshold for each port.
rate-limit-pps
Set the rate-limit threshold with the
valid range of [1, 9999].
attack-threshold-pps
Set the attack threshold with the
valid range of [1, 9999].
Default
Settings
By default, the rate-limit threshold and the attack threshold are not
configured.