Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 407 / 1192

CLI Reference IPv6 Configuration Commands
Parameter
Description
Parameter Description
verbose Show the neighbor details.
static
Show the validity status of static neighbors.
vrf-name VRF name
interface-id Show the neighbors of the specified interface.
ipv6-addres Show the neighbors of the specified IPv6 address.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
Show the neighbors on the SVI 1 interface:
Ruijie# show ipv6 neighbors vlan 1
IPv6 Address Linklayer Addr Interface
fa::1 00d0.0000.0002 vlan 1
fe80::200:ff:fe00:2 00d0.0000.0002 vlan 1
Show the neighbor details:
Ruijie# show ipv6 neighbors verbose
IPv6 Address Linklayer Addr Interface
2001::1 00d0.f800.0001 vlan 1
State: Reach/H Age: - asked: 0
fe80::200:ff:fe00:1 00d0.f800.0001 vlan 1
State: Reach/H Age: - asked: 0
Field Meaning
IPv6 Address IPv6 address of the Neighbor
Linklayer Addr
Link address, namely, MAC address. If it is not
available, incomplete is displayed.
Interface Interface the neighbor locates.
State
State of the neighbor: state/H(R)
The values of STATE are as below:
INCMP (Incomplete): The address resolution of
the neighbor is underway, the NS is sent, but
the NA is not received.
REACH (Reachable): The switch is connected
with the neighbor. In this state, the switch takes
no additional action when sending packets to
the neighbor.
STALE: The reachable time of the neighbor
expires. In this state, the switch takes no