Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 700 / 1192

CLI Reference Web Authentication Configuration Commands
Port Access device port connected to the user
Online Whether the user is online
Time
Limit
Available duration of the user. 0 means
unlimited.
Time
Used
Online duration of the user
Time
Start
Time when the user passes
authentication and gets online
Status
User status. Active means the user is
normally online, Create means the user is
created without any settings, Destroy
means the user is deleted with its settings
not cleared.
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
web-auth allow-vlan
This command is used to set VLAN-based Web authentication function and the authenticated VLAN
list. The no form of this command is used to cancel the setting.
web-auth allow-vlan list
no web-auth allow-vlan [ list ]
Parameter
Description
Parameter Description
list Set the VLAN list for VLAN-based Web authentication.
Defaults VLAN-based Web authentication is disabled and no authenticated VLAN list is set.
Command
Mode
Global configuration mode
Usage Guide
Setting an authenticated VLAN list will automatically enable VLAN-based authentication. Deleting an
authenticated VLAN list (removing all VLANs from the list) will disable VLAN authentication.
To enable VLAN-based authentication, you need to enable Web authentication on the downlink port
of the device and turn the port to the TRUNK mode.
Configuration
Examples
Example 1: Set authenticated VLANs to VLAN 1, VLAN 2, VLAN 3, and VLAN 5.
Ruijie(config)# web-auth allow-vlan 1-3,5