Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 559 / 1192

CLI Reference IGMP Snooping Configuration Commands
Command
mode Profile configuration mode.
Usage
guidelines
First, configure the multicast range using the range command in the
profile configuration mode. In addition, the profile must be applied to
the interface in order to make the profile configuration to take
effective.
Examples
The following is an example of allowing the forwarding of the
multicast stream 224.2.2.2:
Ruijie(config)# ip igmp profile 1
Ruijie(config-profile)# range 224.2.2.2
Ruijie(config-profile)# permit
Related
commands
Command Description
ip igmp
profile
Create a profile.
range Configure the multicast address range.
range
To specify the range of multicast streams, execute the range command in the profile configuration mode.
You can specify either a single multicast address or a range of multicast addresses. Use the no form of
the command to remove the specified multicast IP address.
range low-ip-address [ high-ip-address ]
no range low-ip-address [ high-ip-address ]
Parameter
description
Parameter Description
low-ip-address
Start address of a range
high-ip-address End address of a range
Default N/A.
Command
mode Profile configuration mode.
Usage
guidelines
You can specify a behavior after configuring the address range, for
example deny by default. In addition, the profile must be applied to
the interface in order to make the profile configuration take effect.
Examples
The following is an example of creating a profile whose multicast
stream is in the range 224.2.2.2 to 224.2.2.244: