Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 334 / 1192

CLI ReferenceInterface Configuration Commands QinQ Configuration Commands
Platform
description The software version must be RGOS10.3 and later.
traffic-redirect access-group acl outer-vlan
Use this command to configure the modify policy list of outer vid based on flow on
access,trunk,hybrid port.
traffic-redirect access-group acl outer-vlan vid in
no traffic-redirect access-group acl outer-vlan
Parameter
description
Parameter Description
acl Flow matching.
vid Modified outer vid list
no Remove the settings.
Default
configuration
Null policy list.
Command
mode Interface configuration mode.
Examples
Here is an example of configuring outer vid of input message whose
source address is 1.1.1.1 as 3:
Ruijie# configure
Ruijie(config)# ip access-list standard 2
Ruijie(config-std-nacl)# permit host 1.1.1.1
Ruijie(config-std-nacl)# exit
Ruijie(config)# interface gigabitEthernet 0/1
Ruijie(config-if)# switchport mode trunk
Ruijie(config-if)# traffic-redirect access-group 2 outer-vlan 3 in
Ruijie(config-if)# end
Related
commands
Command Description
show traffic-redirect
Platform
description
The software version must be RGOS10.3 and later.
traffic-redirect access-group acl inner-vlan
Use this command to configure the modification policy of inner vid based on flow for the
packets outputted from the access,trunk,hybrid port.