Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 668 / 1192

CLI Reference 802.1X Configuration Commands
Usage Guide
Use this command to specify the maximum number of failed re-authentication
attempts. Use show dot1x command to show the 802.1X setting.
Configuration
Examples
The following example shows how to set the maximum number of re-authentication
attempts:
Ruijie# configure terminal
Ruijie(config)# dot1x reauth-max 5
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status: Enabled
Authentication mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Enable
Re-authen Period: 1000 sec
Quiet Timer Period: 1000 sec
Tx Timer Period: 10 sec
Supplicant Timeout: 10 sec
Server Timeout: 10 sec
Re-authen Max: 5 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Related Commands
Command Description
show dot1x It is used to show the 802.1x setting.
Platform
Description
-
dot1x stationarity enable
In the port-based 802.1X control mode, dynamic users can transit freely among ports by default.
This command is used to stop users from transiting from 802.1X port to other ports in special
circumstances.
dot1x stationarity enable
no dot1x stationarity enable
Parameter
Description
-
Defaults Dynamic users can transit freely among ports.