Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 366 / 1192

CLI Reference IP Address Configuration Commands

The network cannot be started using an unnumbered interface.
Configuration
Examples
In the example below the local interface is configured as an unnumbered interface,
and the associated interface is FastEthernet 0/1. An IP address must be configured
for the associated interface.
ip unnumbered fastEthernet 0/1
Related
Commands
Command Description
show interface Show detailed information of the
interface.
Platform
Description
This command is not supported on the Layer 2 switch.
ip unreachables
Use this command to allow the RGOS software to generate ICMP destination
unreachable messages. The no form of this command disables this function.
ip unreachables
no ip unreachables
Parameter
Description
Parameter Description
N/A N/A
Defaults Enabled.
Command
Mode
Interface configuration mode.
Usage Guide RGOS software will send a ICMP destination unreachable message if it receives
unicast message with self-destination-address and can not process the upper
protocol of this message.
RGOS software will send ICMP host unreachable message to source data if it can not
forward a message due to no routing.
This command influences all ICMP destination unreachable messages.
Configuration
Examples
The following example disables sending ICMP destination unreachable message on
FastEthernet 0/1.
interface fastEthernet 0/1
no ip unreachables
Related
Commands
Command Description