Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 734 / 1192

CLI Reference CPU Protection Configuration Commands
CPU Protection Configuration Commands
cpu-protect type packet-type traffic-class traffic - class - num
Use this command to set the traffic class for the corresponding packet type.
cpu-protect type { bpdu | arp | tpp | dot1x | gvrp | rdlp | dhcp | unknown-ipv6-mc |
known-ipv6-mc | unknown-ipv4-mc | known-ipv4-mc | udp-helper | dvmrp | igmp |
icmp | ospf | pim | rip | vrrp | error-ttl | error-hop-limit | local-telnet | local-snmp |
local-http | local-tftp | local-other | ipv4-uc | ipv6-uc | mld| ns | other } traffic-class
traffic - class - num
Parameter
description
Parameter Description
traffic - class - num The corresponding queue id, in the
range of 0-7.
Default
The default corresponding relationships between the packet type and
queue ID are shown in the following table:
For the S2900 series:
Packet Type Queue ID
BPDU 6
ARP 5
IGMP 3
802.1X 3
GVRP 3
DHCP 2
Error_TTL 0
Known_ mc 4
Unknown_ mc 1
Multicast 1
Broadcast 0
Error_ttl 0
Co-operate 6
Other 0
For the S3760 series:
Packet Type Queue ID