Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 621 / 1192

CLI Reference RADIUS Configuration Commands
Parameter
description
Parameter Description
hostname
DNS name of the RADIUS security
server host.
ip-address
IP address of the RADIUS security
server host.
auth-port
UDP port used for RADIUS
authentication.
port-numbe r
Number of the UDP port used for
RADIUS authentication. If it is set to
0, this host does not perform
authentication.
acct-port
UDP port used for RADIUS
accounting.
port-number
Number of the UDP port used for
RADIUS accounting. If it is set to 0,
this host does not perform
accounting.
test username
name
(Optional) Enable the active detection
to the RADIUS security server and
specify the username used by the
active detection.
idle-time time
(Optional) Set the interval of sending
the test packets to the reachable
RADIUS security server, which is 60
minutes by default and in the range of
1 to 1440 minutes (namely 24 hours).
ignore-auth-port
(Optional) Disable the detection to the
authentication port on the RADIUS
security server. It is enabled by
default.
ignore-acct-port
(Optional) Disable the detection to the
authentication port on the RADIUS
security server. It is enabled by
default.
Default No RADIUS host is specified.
Command
mode Global configuration mode.
Usage
In order to implement the AAA security service using RADIUS, you