Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 268 / 1192

CLI ReferenceInterface Configuration Commands MSTP Configuration Commands
Description point-to-point Forcibly set the link type of the interface to point-to-point.
shared Forcibly set the link type of the interface to shared.
Defaults
For a full-duplex interface, its link type is point-to-point link by default; for a half-duplex
interface, its link type is shared by default.
Command Mode Interface configuration mode
Usage Guide -
Configuration
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# spanning-tree link-type
point-to-point
Related Commands
Command Description
show spanning-tree interface Show the STP configuration of an interface.
Platform Description -
spanning-tree loopguard default
This command is used to enable loop guard globally to prevent the root port or backup port
from generating loops as the result that they cannot receive bpdu. You can use the no form of
this command to disable the loop guard .
spanning-tree loopguard default
no spanning-tree loopguard default
Parameter
Description
Parameter Description
- -
Defaults Disabled
Command Mode Global configuration mode
Usage Guide -
Configuration
Examples
Ruijie(config)# spanning-tree loopguard default
Related Commands
Command Description
- -