Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 458 / 1192

CLI Reference DHCPv6 Configuration Commands
ipv6 dhcp client pd
Use this command to enable the DHCPv6 client and request for the prefix address information. Use
the no form of this command to disable the prefix address request
ipv6 dhcp client pd prefix-name [ rapid-commit ]
no ipv6 dhcp client pd
Parameter
Description
Parameter Description
prefix-name Define the IPv6 prefix name.
rapid-commit Allow the simplified interaction process.
Defaults Disabled
Command
Mode
Interface configuration mode.
Usage Guide
With the DHCPv6 client mode disabled, use this command to enable the DHCPv6 client mode on the
interface.
With the ipv6 dhcp client pd command enabled, the DHCPv6 client sends the prefix request to the
DHCPv6 server
The keyword rapid-commit allows the client and the server two-message interaction process. With
this keyword configured, the solicit message sent by the client includes the rapid-commit item.
Configuration
Examples
The following example shows how to enable the prefix information request on the interface:
Ruijie(config)# interface fastethernet 0/1
Ruijie(config-if)# ipv6 dhcp client pd pd_name
Related
Commands
Command Description
clear ipv6 dhcp client
Reset the DHCPv6 client function on the
interface.
show ipv6 dhcp interface Show the DHCPv6 interface configuration.
Platform
Description
N/A
ipv6 dhcp pool
Use this command to set the DHCPv6 server pool. Use the no form of this command to remove the
information pool.
ipv6 dhcp pool poolname
no ipv6 dhcp pool poolname