Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 375 / 1192

CLI Reference IP Address Configuration Commands
Field Description
Protocol
Network address protocol, always
Internet.
Address
The IP address corresponding to the
hardware address.
Age (min)
Age of the ARP cache record, in
minutes; If it is not locally or statically
configured, the value of the field is
represented with “-”.
Hardware
Hardware address corresponding to
the IP address
Type
The type of hardware address. The
value is ARPA for all Ethernet
addresses.
Interface
Interface associated with the IP
address.
Related
Commands
Command Description
N/A. N/A.
Platform
Description
This command is not supported on the Layer 2 switch.
show ip interface
Use this command to show the IP status information of an interface. The command
format is as follows:
show ip interface [ interface-type interface-number | brief ]
Parameter
Description
Parameter Description
interface-type Specify interface type.
interface-number Specify interface number.
brief Show the brief configurations about the IP of the
layer-3 interface (including the interface primary ip,
secondary ip and interface status)
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
When an interface is available, RGOS will create a direct route in the routing table.