Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 813 / 1192

CLI Reference NFPP Configuration Commands
commands
arp-g
uard
attac
k-thr
esho
ld
Set the global attack threshold.
show nfpp
arp-guard
summary
Show the configurations.
show nfpp
arp-guard scan
Show the ARP scan table.
clear nfpp
arp-guard scan
Clear the ARP scan table.
dhcp-guard attack-threshold
Use this command to set the global attack threshold. When the packet rate exceeds the attack threshold,
the attack occurs.
dhcp-guard attack-threshold { per-src-mac | per-port } pps
Parameter
description
Parameter Description
per-src-mac
Set the attack threshold for each
source MAC address.
per-port Set the attack threshold for each port.
pps
Set the attack threshold, in pps. The
valid range is [1,9999].
Default
Settings
By default, the attack threshold for each source MAC address is
10pps; and the attack threshold for each port is 300pps.
Command
mode NFPP configuration mode.
Usage
guidelines N/A.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# dhcp-guard attack-threshold per-src-mac 15
Ruijie(config-nfpp)# dhcp-guard attack-threshold per-port 200
Related
Command Description