Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 646 / 1192

CLI Reference 802.1X Configuration Commands
show dot1x interface This command is used to show the 802.1x setting.
Platform
Description
-
dot1x auth-mode
Use this command to set the 802.1x authentication mode.
dot1x auth-mode { eap-md5 | chap | pap }
no dot1x auth-mode
Parameter
Description
Parameter Description
eap-md5 Use the EAP-MD5 authentication mode.
chap Use the CHAP authentication mode.
pap Use the PAP authentication mode.
Defaults EAP-MD5 mode
Command Mode Global configuration mode
Usage Guide Use the show dot1x command to show the 802.1X setting.
Configuration
Examples
This example shows how to set the 802.1X authentication mode:
Ruijie# configure terminal
Ruijie(config)# dot1x auth-mode chap
Ruijie(config)# end
Ruijie#
Related Commands
Command Description
show dot1x
This command is used to show the 802.1x setting.
Platform
Description
-
dot1x auto-req
Use this global configuration command to configure 802.1X active authentication
function. Use the no form of this command to disable the active authentication
function.
dot1x auto-req
no dot1x auto-req