Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 577 / 1192

CLI Reference MLD Snooping Configuration Commands
guidelines MLD Report packets are received on the interface, the
layer-2 device will determine whether the multicast
address to be joined the interface is within the allowed
range of the MLD Profile. The specified profile must be
created before using this command.
Examples
The following example shows how to associate profile1
with the interface fastEthernet 0/1:
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# ipv6 mld snooping filter 1
Related
commands
Command Description
ipv6 mld profile
Create a profile.
ipv6 mld snooping max-groups
Use this command to set the maximum group allowed to join the interface dynamically in the interface
configuration mode. Use the no form of this command to cancel the limit.
ipv6 mld snooping max-groups number
no ipv6 mld snooping max-groups
Parameter
description
Parameter Description
number
The valid range is 0-1024.
Default
Settings 1024
Command
mode Interface configuration mode.
Usage
guidelines
With this command configured, when the group number
exceeds the specified range on the interface, the switch
will not receive and deal with the MLD Report packets.
Examples
The following example shows how to set the maximum 100
multicast group on the interface fastEthernet 0/1:
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# ipv6 mld snooping max-group 100
Related
commands
Command Description
ipv6 mld
snooping filter
Fliter the multicast group on the
interface.