Rohde & Schwarz EVSG1000, User Manual

Page: 79 / 311

Numeric Measurement Modes
R&S
®
EVSG1000
79 User Manual 1178.6227.02 ─ 04
●
TO : North direction at the receiver/ aircraft
To convert one notation to the other, use the following equation:
Phase
TO
= Phase
FROM
+ 180 deg
5.3.2 VOR Measurements and Results
The VOR measurement provides multiple views for the measurement results.
You can display graphical results directly from the VOR mode by selecting the softkey
in the "Meas" menu. In this case, the settings for the current measurement are applied
to the graphical results.
To return from the graphical results to the VOR mode, select "Return" ([F8]).
For details on the graphical results, see:
●
Chapter 6.1, "RF Spectrum Mode (Option R&S EVSG-K10)" , on page 100
●
Chapter 6.2, "IF Spectrum Mode (Option R&S EVSG-K10)" , on page 105
●
Chapter 6.3, "AF Spectrum Mode (Option R&S EVSG-K11)" , on page 110
●
Chapter 6.4, "AF Time Domain Mode (Option R&S EVSG-K12)" , on page 115
Remote command:
VIEW_VOR
on page 247
● RF Level and Frequency Display ............................................................................79
● IF Spectrum Preview ...............................................................................................80
● VOR Main View .......................................................................................................81
● VOR Distortion View ............................................................................................... 83
● VOR ID Analysis View .............................................................................................84
● VOR Recording View .............................................................................................. 86
5.3.2.1 RF Level and Frequency Display
The measured RF power and frequency of the input signal is displayed both numeri-
cally and graphically.
Figure 5-17: RF level display
VOR Mode (Option R&S EVSG-K2)