Getting Started
R&S
®
EVSG1000
13
User Manual 1178.6227.02 ─ 04
2
Getting Started
2.1
Key Features
The R&S
EVSG1000 offers the following key features:
●
Detailed analysis of ILS, VOR and Marker Beacon ground measurements (based
on ICAO Doc. 8071 and ICAO Annex 10)
●
Spectrum preview and detailed signal analysis in frequency and time range
●
Dynamic measurements up to 100 measurements per second in high measure-
ment rate modus
●
Parallel course and clearance signal analysis in two-frequency systems (ILS)
●
Simple remote operation via standard interfaces
●
Software options for specific use cases
●
Integrated data recording
2.2
Preparing for Use
Risk of injury due to disregarding safety information
Observe the information on appropriate operating conditions provided in the data sheet
to prevent personal injury or damage to the instrument. Read and observe the basic
safety instructions provided with the instrument, in addition to the safety instructions in
the following sections. In particular:
●
Do not open the instrument casing.
Risk of instrument damage due to inappropriate operating conditions
Specific operating conditions are required to ensure accurate measurements and to
avoid damage to the instrument. Observe the information on appropriate operating
conditions provided in the basic safety instructions and the instrument's data sheet.
2.2.1
Unpacking and Checking the R&S
EVSG1000
Check the equipment for completeness using the delivery note and the accessory lists
for the various items. Check the instrument for any damage. If there is damage, imme-
Preparing for Use
