manualshive.com logo in svg

Rohde & Schwarz EVSG1000, User Manual

Share
Download
Rohde & Schwarz EVSG1000 User Manual Download Page 184

Common Instrument Settings

R&S

®

EVSG1000

184

User Manual 1178.6227.02 ─ 04

The hardware status overview provides information on the current operating status of
the individual hardware components in the R&S

 

EVSG1000 (individually for RX1 and

RX2 boards), such as test voltages and temperatures.

The test voltages are measured continuously, internally, and checked against defined
limit values. If one of the test voltages exceeds the tolerance for more than 10

 

s, the

following measures are taken by the R&S

 

EVSG1000:

●

An error message is created in the error log (see 

"Error Log"

 

on page 182).

●

The measured test voltage is indicated in red.

●

"UNCAL" is displayed in the measurement window to indicate the measured values
may be invalid.

Remote command: 

BI?

 

on page 206

GETTEMP

 

on page 207

Installed Options
Access

: [Setup] > "Signal In"

Access VNC

: [n] > [F8] > [F4]

Displays a table with the currently installed option keys.

For all purchased R&S

 

EVSG1000 options, a license key is provided by

Rohde

 

&

 

Schwarz.

Instrument Configuration and Operating Status Settings

Summary of Contents for EVSG1000
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands