![Rohde & Schwarz EVSG1000 User Manual Download Page 237](http://html.mh-extra.com/html/rohde-and-schwarz/evsg1000/evsg1000_user-manual_1477821237.webp)
Remote Commands
R&S
®
EVSG1000
237
User Manual 1178.6227.02 ─ 04
ID_DOTDASH_GAP
Queries the length of time that passes between a transmitted dot and a dash in the
used Morse code in "ILS LOC" mode.
Return values:
<Time>
Dot-Dash gap time of ID signal
Default unit: ms
Manual operation:
See
ID_LETTER_GAP
Queries the length of time that passes between two transmitted letters in the used
Morse code in "ILS LOC" mode.
Return values:
<Time>
Letter gap time of ID signal
Default unit: ms
Manual operation:
See
ID_PERIOD
Queries the periodic time between two measured ID pulses in "ILS LOC" mode.
Return values:
<Time>
Periodic time between two ID pulses.
Default unit: s
Manual operation:
See
LASTID_TIME
Queries the time since last valid ID pulse was measured in "ILS LOC" mode.
Return values:
<Time>
Time since last valid ID pulse
Default unit: s
Manual operation:
See
13.2.6
Deprecated Commands
The following commands are maintained for compatibility with former
Rohde
&
Schwarz analyzers only. For new remote control programs, use the com-
Chapter 13.2.1, "Configuring the ILS LOC and GP Modes"
Chapter 13.11, "Data Management"
ILS Localizer (LOC) and Glidepath (GP) Modes