Rohde & Schwarz EVSG1000 User Manual Download Page 12

Page: 12 / 311

Preface

R&S

EVSG1000

User Manual 1178.6227.02 ─ 04

The contents of the user manual are also available as online help on the
R&S

EVSG1000.

1.2.3

Basic Safety Instructions

Contains safety instructions, operating conditions and further important information.
The printed document is delivered with the instrument.

1.2.4

Data Sheets and Brochures

The data sheet contains the technical specifications of the R&S

EVSG1000. It also lists

the firmware applications and their order numbers, and optional accessories.

The brochure provides an overview of the instrument and deals with the specific char-
acteristics.

See

www.rohde-schwarz.com/brochure-datasheet/evsg/

1.2.5

Release Notes and Open Source Acknowledgment (OSA)

The release notes list new features, improvements and known issues of the current
firmware version, and describe the firmware installation.

The open source acknowledgment document provides verbatim license texts of the
used open source software.

See

www.rohde-schwarz.com/software/EVSG1000

Documentation Overview

Summary of Contents for EVSG1000
























































































































































































































































































































Search results

Summary of Contents for EVSG1000

Reviews:

Brands by name

Popular brands

Rohde & Schwarz EVSG1000, User Manual

Search results

Summary of Contents for EVSG1000

Reviews:

Brands by name

Popular brands