manualshive.com logo in svg

Rohde & Schwarz EVSG1000, User Manual

Share
Download
Rohde & Schwarz EVSG1000 User Manual Download Page 15

Getting Started

R&S

®

EVSG1000

15

User Manual 1178.6227.02 ─ 04

2.2.3

 

Connecting the Power Supply

To ensure high mobility and flexibility while using the R&S

 

EVSG1000, it is equipped

with a DC power supply connector on the rear panel of the instrument. DC power can
be supplied by the installed battery, the provided power supply unit, or from appropriate
external DC power sources.

Risk of instrument damage due to excess voltage

The R&S

 

EVSG1000 must be operated only on DC power with a voltage of 10

 

V

 

DC to

28

 

V

 

DC and a current of 3.0

 

A.

The provided DC power supply unit must only be plugged into a two-pin grounded
socket!
Use the provided AC/DC power supply unit to operate the R&S

 

EVSG1000 on a 230

 

V

AC power supply.

2.2.3.1

 

Connecting the Provided DC Power Supply

Risk of electric shock!

When connecting to an AC power supply, only the supplied AC/DC power supply con-
nector must be used!

Connect the R&S

 

EVSG1000 to the provided AC/DC power supply as follows:

1. Connect the DC connector on the provided AC/DC power supply unit to the

"POWER" connector on the back of the R&S

 

EVSG1000 (see 

"Power Supply"

on page 22).

2. Connect the power cable to the AC/DC power supply and to a main power socket.

The green operating LED of the AC/DC power supply connector lights up.

2.2.3.2

 

Connecting an External DC Power Source

The R&S

 

EVSG1000 can be operated directly from an external DC power source (10

V

 

DC to 28 V

 

DC).

Preparing for Use

Summary of Contents for EVSG1000
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands