manualshive.com logo in svg

Rohde & Schwarz EVSG1000, User Manual

Share
Download
Rohde & Schwarz EVSG1000 User Manual Download Page 130

GBAS/SCAT-I Mode (Options R&S

 

EVSG-K4/-K5)

R&S

®

EVSG1000

130

User Manual 1178.6227.02 ─ 04

●

Chapter 7.3.2.2, "Frame Results Table"

, 

on page 130

7.3.2.1

 

Frame Power Vs. Time Diagram

The power vs. time diagram displays the measured power per time, normalized to the
PPS signal. The fixed slot grid defined by the PPS (reference) signal is indicated by
vertical lines in the diagram. In addition to the time in milliseconds, the slot label A to H
is indicated on the x-axis. The time axis always starts at 0

 

seconds or 500

 

millisec-

onds.

The measured power is indicated for a range of -120

 

dBm to 0

 

dBm on the y-axis.

7.3.2.2

 

Frame Results Table

In the frame results table, the details for each slot in the selected frame are displayed,
one slot per column. The currently selected slot is indicated by a dotted rectangle in
the frame results table. If a slot timing error or a signal level error occurs, the slot is
highlighted red.

To scroll through the parameters in the table for a single slot, use the arrow keys up
and down.

GBAS / SCAT-I Measurement Views and Results

Summary of Contents for EVSG1000
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands