manualshive.com logo in svg

Rohde & Schwarz EVSG1000, User Manual

Share
Download
Rohde & Schwarz EVSG1000 User Manual Download Page 26

Getting Started

R&S

®

EVSG1000

26

User Manual 1178.6227.02 ─ 04

●

19''-adapter (R&S

 

EVSG-Z7)

This option is required for the mounting of the R&S

 

EVSG1000 in a 19'' rack (e.g.

in a measurement vehicle).

2.4

 

Operating Basics

The R&S

 

EVSG1000 is designed for ground inspection and is thus optimized for man-

ual operation, via the graphical user interface.

Nevertheless, the instrument can also be controlled remotely, either by executing pre-
defined commands, or by simulating the user interface on a remotely connected
device.

This chapter provides an overview on how to work with the R&S

 

EVSG1000. It

describes what kind of information is displayed on the screen and how to operate the
R&S

 

EVSG1000 manually and remotely.

2.4.1

 

Understanding the Display Information

The following figure shows a typical screen display on the R&S

 

EVSG1000. All differ-

ent screen elements are labeled. They are explained in more detail in the following
sections.

2

3

1

4

Figure 2-8: R&S

 

EVSG1000 - GUI Overview

Operating Basics

Summary of Contents for EVSG1000
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands