Getting Started
R&S
®
EVSG1000
20
User Manual 1178.6227.02 ─ 04
tion key is also called a menu. Softkeys can either perform a specific function or open
a dialog box.
Function Keys
Function keys provide access to the most common measurement settings and func-
tions.
Table 2-2: Function keys
Function key
Assigned functions
[CH Freq]
Sets the center frequency and the start and stop frequencies
[Ampt]
Sets the reference level, the displayed dynamic range, and the RF
attenuation for the level display
[BW]
Sets the resolution bandwidth
[Meas]
Provides the measurement settings for the active measurement mode
[Config]
Configures measurements and data input and output
[MTime]
Configures the measurement time
[Marker]
Sets and positions the absolute and relative measurement markers
(markers and delta markers)
[Mkr]->
Provides search functions for the measurement markers (maximum/
minimum of the trace)
Sets the center frequency to the current marker frequency
[Mkr Fct]
Provides further marker functions, such as removing all markers
[Record]
Starts and stops the continuous data recording.
[Trigger]
Opens the Trigger Menu.
[Single]
Saves a single dataset.
Keypad
The keypad is used to enter numeric parameters, including the corresponding units. It
contains the following keys.
Type of key
Description
Decimal point
Inserts a decimal point "." at the cursor position.
Sign key
Changes the sign of a numeric parameter. In the
case of an alphanumeric parameter, inserts a "-" at
the cursor position.
Unit keys
(GHz/-dBm MHz/dBm, kHz/dB, Hz/dB etc.)
Adds the selected unit to the entered numeric value
and complete the entry.
In the case of level entries (e.g. in dB) or dimension-
less values, all units have the value "1" as multiply-
ing factor. Thus, they have the same function as an
ENTER key.
Instrument Tour
