manualshive.com logo in svg

Rohde & Schwarz EVSG1000, User Manual

Share
Download
Rohde & Schwarz EVSG1000 User Manual Download Page 32

Getting Started

R&S

®

EVSG1000

32

User Manual 1178.6227.02 ─ 04

Navigating in the help system

To move up and down

► Use the arrow keys.

To switch between areas

► Press the Field left and Field right keys.

VNC:
Press the [PAGE UP] and [PAGE DOWN] keys.

To follow a link

► Press [Enter].

To exit the online help and return to the firmware view

► Press [ESC].

2.4.3

 

Manual Operation from a VNC Viewer

As an alternative to operating the R&S

 

EVSG1000 directly on the instrument, you can

perform the same tasks from a connected PC using a keyboard. You merely require a
VNC viewer application, of which a variety is available on the Internet free of charge.

Operating Basics

Summary of Contents for EVSG1000
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands