Remote Commands
R&S
®
EVSG1000
262
User Manual 1178.6227.02 ─ 04
Example:
GETMEAS FULL, 1+2, 2
Returns all measurement results for slot 2 in all measurements
on both receiver boards.
Manual operation:
See
"Data selection (Select, GBAS/SCAT-I mode only)"
on page 171
See
GBAS:STREAM
<ParamSel>, [+MSG,] <RX Board>, <Slots>
Starts data streaming. In streaming mode, a measured data set is automatically sent to
the remote interface. One data set is provided per slot, that is: every 62.5
ms. Stream-
ing can produce large quantities of output. It is mandatory to have a fast data connec-
tion and an application that is able to handle the data.
Chapter 13.11.3.6, "GBAS Mode"
Parameters:
<ParamSel>
Determines which parameter selection is output.
FULL
EVS300 compatibility mode
ALL
All values of the current measurement mode are sent as comma
separated text, using actual units.
MEDIUM
A fixed selection of parameters is exported.
SHORT
A short fixed selection of parameters is exported.
RAW
Only the non-interpreted measurement values from the bit-
stream in binary format are exported
+MSG
Optional: If specified, the message data is included in the data
stream, surrounded by curly brackets { }
<RX-Board>
Selects the RX board for which results are exported.
1
RX board 1 selected
2
RX board 2 selected
1+2
Both RX boards selected
<Slots>
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7
Selects one or more slots for which results are exported. Multi-
ple slots can be selected.
Return values:
<State>
READY.
The command was executed successfully.
GBAS/ SCAT-I Mode
