Getting Started
R&S
®
EVSG1000
19
User Manual 1178.6227.02 ─ 04
"RX 2 In" is supplied as an option (R&S
EVSG-B1).
This option allows you to perform two independent measurements simultaneously, for
example on different frequencies. This capability is vital in flight inspection systems
because localizer and glidepath signals must be measured at the same time. An addi-
tional application required in flight inspection systems is the parallel measurement of
two different VOR stations.
USB
The front panel provides two female USB connectors (USB-A, 2.0 standard) to connect
a memory device.
The memory device is used to store and reload instrument settings, to provide software
updates and to export measurement data.
AF Out
Connector for a headset with a 3.5
mm jack plug
12 V DC Out
DC output for an active receiving antenna.
System Keys
System keys set the instrument to a predefined state, change basic settings, and pro-
vide print and display functions.
Table 2-1: System keys
System key
Assigned functions
[Preset]
Opens the "Preset" menu.
[Screenshot]
Creates screenshot and stores it internally.
[Audio]
Opens the "Audio" menu.
[Display]
Opens the "Display" menu.
[Help]
Opens the online help.
[Setup]
Opens the "Setup" menu containing general instrument settings.
[Mode]
Opens the measurement mode selection (for example ILS LOC,
VOR, COM)
Softkeys
Softkeys are virtual keys provided by the software. Thus, more functions can be provi-
ded than those that can be accessed directly via the function keys on the instrument.
Softkeys are dynamic, i.e. depending on the selected function key, a different list of
softkeys is displayed on the right side of the screen. A list of softkeys for a certain func-
Instrument Tour
