manualshive.com logo in svg

Rohde & Schwarz EVSG1000, User Manual

Share
Download
Rohde & Schwarz EVSG1000 User Manual Download Page 47

Numeric Measurement Modes

R&S

®

EVSG1000

47

User Manual 1178.6227.02 ─ 04

Figure 5-3: IF spectrum preview

This preview spectrum allows you to check if the current measurement settings are
appropriate, such as the bandwidth or frequency offsets. For a larger, more detailed
spectrum diagram, select one of the graphical Spectrum modes. If you switch to such a
mode directly from a numeric measurement mode, the current measurement settings
are applied to the spectrum automatically.

5.1.3.3

 

ILS Localizer and Glidepath Main View

The ILS Localizer and Glidepath Main view provides the following results:

Figure 5-4: ILS Localizer Main view

ILS Localizer and ILS Glidepath (GP) Modes

Summary of Contents for EVSG1000
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands