manualshive.com logo in svg

Rohde & Schwarz EVSG1000, User Manual

Share
Download
Rohde & Schwarz EVSG1000 User Manual Download Page 150

GBAS/SCAT-I Mode (Options R&S

 

EVSG-K4/-K5)

R&S

®

EVSG1000

150

User Manual 1178.6227.02 ─ 04

Table 7-6: Optional subelements

Name

Description

<resolution>

Determines the resolution of the element contents, e.g. a result value.

The value is multiplied with the <resolution> factor to obtain the output
result. Note that the number of decimals of the <resolution> factor also
defines the number of decimals in the result.

(Default: 1)

<unit>

Additional unit which is appended to the result

<special>

Special text that is provided as a result instead of using the value and
resolution

 

<value>

Actual result value

<name>

Provided result text

Example: 

<Element>
   <data_content>Source Availability Duration</data_content>
   <data_content_short>SRC_DUR</data_content_short>
   <bits_used>8</bits_used>
   <type>unsigned</type>
   <special>   <value>254</value>   <name>&gt;2540</name>   </special>
   <special>   <value>255</value>   <name>not   provided</name>   </special>
   <resolution>10</resolution>
   <unit>s</unit>
</Element>

7.5.5.2

 

Signed Type

Interprets the value in a given number of bits as a signed integer value in decimal for-
mat

Table 7-7: Mandatory subelements

Name

Description

<bits_used>

Static number of bits

Table 7-8: Optional subelements

Name

Description

<resolution>

Determines the resolution of the element contents, e.g. a result value.

The value is multiplied with the <resolution> factor to obtain the output
result. Note that the number of decimals of the <resolution> factor also
defines the number of decimals in the result.

(Default: 1)

<unit>

Additional unit which is appended to the result

<special>

Special text that is provided as a result instead of using the value and
resolution

Message XML Interface

Summary of Contents for EVSG1000
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands