
Remote Commands
R&S
®
EVSG1000
270
User Manual 1178.6227.02 ─ 04
Manual operation:
See
IFSPECT_RES_BW?
IFSPECT_RES_BW
<Bandwidth>
Gets or sets the resolution bandwidth for "IF Spectrum" mode.
Parameters:
<Bandwidth>
200K | 100K | 50K | 25K | 12K5 | 6K2 | 3K1 | 1K6 | 800 | 240K |
120K | 60K | 30K | 15K | 7K5 | 3K75 | 1K87 | 937 | 468 | 234 |
117 | 12K | 6K | 3K | 1K5 | 750 | 375 | 187 | 94 | 47 | 23.4 | 11.7 |
1K2 | 600 | 300 | 150 | 75 | 37.4 | 18.7 | 9.4 | 4.7 | 2.3 | 120.0 |
60.0 | 30.0 | 15.0 | 7.5 | 3.7 | 1.9 | 0.9 | 0.5
Return values:
<State>
READY.
The command was executed successfully.
Manual operation:
See
IFSPECT_TRACE_MODE?
IFSPECT_TRACE_MODE
<Trace mode>
Gets or selects the trace mode of the "IF Spectrum" mode.
Parameters:
<Trace Mode>
CLWR
Overwrite mode (default): the trace is overwritten by each sweep
AVRG
The average is determined over several sweeps
The number of averaging procedures is defined by
MAXHOLD
The maximum value is determined over several sweeps and dis-
played. The R&S
EVSG1000 saves each trace point in the trace
memory only if the new value is greater than the previous one.
The number of evaluated sweeps is defined by
RMS
The RMS value for each trace point over several sweeps is
determined and displayed.
The number of evaluated sweeps is defined by
Return values:
<State>
READY.
The command was executed successfully.
Manual operation:
See
IF Spectrum Mode