manualshive.com logo in svg

Rohde & Schwarz EVSG1000, User Manual

Share
Download
Rohde & Schwarz EVSG1000 User Manual Download Page 227

Remote Commands

R&S

®

EVSG1000

227

User Manual 1178.6227.02 ─ 04

Parameters:

<Bandwidth>

1KHZ | 3KHZ | 6KHZ | 10KHZ
Demodulator bandwidth

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"BW 1F/2F"

 

on page 61

GS_DEM_ID_BW?
GS_DEM_ID_BW 

<Bandwidth>

Gets or sets the ID demodulator Bandwidth in "ILS GP" mode.

Parameters:

<Bandwidth>

1KHZ | 3KHZ | 6KHZ | 10KHZ

Return values: 

<State>

READY.

The command was executed successfully.

GS_DEM_WIDE_BW?
GS_DEM_WIDE_BW 

<Bandwidth>

Gets or sets the WIDE demodulator bandwidth in "ILS GP" mode.

Parameters:

<Bandwidth>

1KHZ | 3KHZ | 6KHZ | 10KHZ | 18KHZ | 25KHZ | 36KHZ |
50KHZ

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"BW Wide"

 

on page 61

GS_DEMFREQS_OFFSET_AUTOMAN?
GS_DEMFREQS_OFFSET_AUTOMAN 

<Mode>

Gets or sets the mode of the demodulator frequency offset in "ILS GP" mode.

Parameters:

<Mode>

AUTO

Sets the demodulator frequenecy offset automatically.

MANUAL

Sets the demodulator frequency offset manually.

Return values: 

<State>

READY.

The command was executed successfully.

Manual operation: 

See 

"CRS/CLR Carr"

 

on page 57

ILS Localizer (LOC) and Glidepath (GP) Modes

Summary of Contents for EVSG1000
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands