Ricoh Pro L5130 Operating Instructions Manual Download Page 31

Page: 31 / 264

2. Indicator (both orange and green)

When 1000BASE-T is operating, both LEDs are lit.

• For details about how to turn on and off the power, see page 32 "Turning On/Off the

Power".

Connecting the Power Cord

• Do not use any power sources other than those that match the specifications shown. Doing so

could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications shown. Doing so could

result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords

that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with other appliances.

Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric

shock.

• If the power cord is damaged and its inner wires are exposed or broken, contact your service

representative for a replacement. Use of damaged power cords could result in fire or electric
shock.

Connecting the Cable

Summary of Contents for Pro L5130









































































































































































































































































Search results

Summary of Contents for Pro L5130

Reviews:

Related manuals for Pro L5130

Brands by name

Popular brands

Ricoh Pro L5130, Operating Instructions Manual

Search results

Summary of Contents for Pro L5130

Reviews:

Related manuals for Pro L5130

Brands by name

Popular brands