Ricoh Pro L5130 Operating Instructions Manual Download

Page: 129 / 264

17.

Slide up all lock levers to lock the cartridges.

Make sure to lock the other empty cartridge holders.

18.

Press [Execute].

The displacement liquid is discharged. Wait until a message appears on the control panel.

19.

Confirm the message on the control panel, and then slide down all lock levers to unlock
the cartridges.

20.

Take out the ink cartridges that you inserted in Step 16.

21.

Pinch the protrusions of the ink replacement tool, and then take it out from the cartridge.

DWT180

22.

Fully insert all the ink cartridges into their cartridge holders until they stop.

23.

Slide up all lock levers to lock the cartridges.

24.

Press [Execute].

Wait until the message is displayed on the control panel.

25.

Press [Execute].

26.

Open the right cover.

DWT183

27.

Perform air purging to extract displacement liquid from the ink supply route.

• For details, see Step 8 and onwards of page 189 "When You Want to Clear Ink Mixes".
• When performing air purging, use the air purge ports for head 2.

Using the Displacement Liquid Instead of White Ink

127

Summary of Contents for Pro L5130









































































































































































































































































Search results

Summary of Contents for Pro L5130

Reviews:

Related manuals for Pro L5130

Brands by name

Popular brands

Ricoh Pro L5130, Operating Instructions Manual

Search results

Summary of Contents for Pro L5130

Reviews:

Related manuals for Pro L5130

Brands by name

Popular brands