Ricoh Pro L5130 Operating Instructions Manual Download Page 59

Page: 59 / 264

13.

Insert the tip of the media between the feed rollers and pinch rollers.

DWT132

• If the media is difficult to insert because the edges of the media are getting caught, diagonally

insert the media between the rollers, so that one corner gets inserted first. Ensure the media is
inserted evenly, and begin feeding.

DWT162

• Holding the edge of the media, adjust the angle at the leading edge of the media and load it.

DWT163

• If there is no media on the sensor, the machine cannot detect media successfully. Set media so

that it covers the media sensor on the left side of the feeding surface.

• Withdraw the media approximately one hand grip's worth from the media feeding surface on

the front of the machine.

Setting Media

Summary of Contents for Pro L5130









































































































































































































































































Search results

Summary of Contents for Pro L5130

Reviews:

Related manuals for Pro L5130

Brands by name

Popular brands

Ricoh Pro L5130, Operating Instructions Manual

Search results

Summary of Contents for Pro L5130

Reviews:

Related manuals for Pro L5130

Brands by name

Popular brands