Reinitialize the Limit
Step By Step Procedure
for VP & RS models
Do It Yourself Guide
Page 1: ...Reinitialize the Limit Step By Step Procedure for VP RS models Do It Yourself Guide ...
Page 2: ...s that when performed correctly takes just a few minutes to complete Performing the Reinitialize The Limit process Continued Next Page Move the Print Carriage out of the home position Press the Carriage to the Right and then gently move it back towards the Left 1 2 Power the machine OFF from the front panel Remove the two screws that hold the right hand cover and remove the cover 5 6 Gently push t...
Page 3: ...UTTER DOWN POS At this time the Cutter Carriage should have separated from the Print Carriage If the Cutter Carriage has not separated from the Print Carriage power the machine OFF and start the process again from Step 1 11 Shortly after the Cut Carriage returns the LCD Panel will read INITIALIZE COMPLETED 9 Take the Cutter Carriage and bring it to the left hand side of the machine and press it fi...
