R&S SMB100A, Operating Manual

Page: 206 / 528

Instrument Function
R&S
®
SMB100A
191 Operating Manual 1407.0806.32 ─ 21
The "Dwell Time" set by the user is used as the step time of the list mode. The effec-
tive net dwell time is shorter, reduced by the setting time. This setting time may be
greater than the time specified in the data sheet.
Remote command:
[:SOURce<hw>]:LIST:DWELl
on page 365
Current Index - List Mode
Sets the list index in "Step" mode.
Remote command:
[:SOURce<hw>]:LIST:INDex
on page 366
Learn List Mode Data... - List Mode
Starts the determination of the hardware setting for the selected list. The data deter-
mined in this way is stored along with the list.
It may be necessary to deliberately activate list learning in the event of greatly altered
environmental conditions that require new hardware settings.
If this is not done, a previously learned hardware setting will continue to be used when
list mode is switched on ("State = On"). If no setting is available, e.g. when the list is
used for the first time, learning is automatically activated.
Remote command:
[:SOURce<hw>]:LIST:LEARn
on page 368
List Mode Data... - List Mode
Calls the "File Select" menu for selecting and creating a list or the "File Manager".
Remote command:
[:SOURce<hw>]:LIST:SELect
on page 370
[:SOURce<hw>]:LIST:DELete
on page 360
[:SOURce<hw>]:LIST:DELete:ALL
on page 361
RF Block