Remote Control Commands
R&S
®
SMB100A
283
Operating Manual 1407.0806.32 ─ 21
*SAV
<Number>
Save
Stores the current instrument settings under the specified number in an intermediate
memory. The settings can be recalled using the command
with the associated
number.
To transfer the stored instrument settings in a file, use the command
.
Manual operation:
See
*SRE
<Contents>
Service request enable
Sets the service request enable register to the indicated value. This command deter-
mines under which conditions a service request is triggered.
Parameters:
<Contents>
Contents of the service request enable register in decimal form.
Bit 6 (MSS mask bit) is always 0.
Range:
0 to 255
*STB?
Status byte query
Reads the contents of the status byte in decimal form.
Usage:
Query only
*TRG
Trigger
Triggers all actions waiting for a trigger event. In particular, *TRG generates a manual
trigger signal. This common command complements the commands of the
TRIGger
subsystem.
Usage:
Event
Manual operation:
See
*TST?
Self-test query
Initiates self-tests of the instrument and returns an error code
Common Commands
