Remote Control Commands
R&S
®
SMB100A
397
Operating Manual 1407.0806.32 ─ 21
Example:
MMEM:CDIR '/var/user/Lists'
selects the directory for the pulse train files.
PULM:TRA:SEL ‘P_INCR'
selects
P_INCR
for editing.
P_INCR
is created if it does not yet
exist.
PULM:TRA:ONT:POIN?
queries the number of frequency values in
P_INCR
Response: 7
P_INCR
has 7 ontime entries.
Usage:
Query only
Options:
R&S SMB-K27 (Pulse Train)
[:SOURce<hw>]:PULM:TRAin:REPetition
<Repetition>
Sets the number of repetitions for each ontime/offtime value pair.
*RST does not affect data lists.
Tip:
"0" ignores the corresponding value pair in the pulse train. Thus, you can individu-
ally omit value pairs without deleting them from the table.
Parameters:
<Repetition>
Repetition#1{, Repetition#2, ...}
Range:
0...65535
Example:
MMEM:CDIR '/var/user/Lists'
selects the directory for the pulse train files.
PULM:TRA:SEL 'P_INCR'
selects
P_INCR
for editing.
P_INCR
is created if it does not yet
exist.
PULM:TRA:ONT 10ns,30ns,40ns,...
specifies the ontime values in
P_INCR
. If the list already con-
tains data, it is overwritten.
PULM:TRA:OFFT 10ns,30ns,40ns,...
specifies the offtime values in
P_INCR
. If the list already con-
tains data, it is overwritten.
PULM:TRA:REP 1,8,3,...
specifies the number of repetitions for each value pair.
Options:
R&S SMB-K27 (Pulse Train)
Manual operation:
See
[:SOURce<hw>]:PULM:TRAin:REPetition:POINts?
Queries the length (in points) of the repetition component of the selected list.
Return values:
<Points>
integer
Range:
0 to INT_MAX
*RST:
0
SOURce Subsystem
