Remote Control Commands
R&S
®
SMB100A
368
Operating Manual 1407.0806.32 ─ 21
Example:
[:SOURce<hw>]:LIST:INDex:STARt
Manual operation:
See
[:SOURce<hw>]:LIST:LEARn
Learns the selected list to determine the hardware setting for all list entries. The results
are saved with the list. When the list is activated the first time, these settings are calcu-
lated automatically.
Example:
LIST:SEL '/var/list3'
selects list file. The file is created if it does not yet exist.
LIST:LEAR
starts learning of the hardware setting for
list3
and stores the
setting.
Usage:
Event
Manual operation:
See
"Learn List Mode Data... - List Mode"
[:SOURce<hw>]:LIST:MODE
<Mode>
Selects how the list is to be processed (similar to
SOURce:SWEep:MODE
).
Parameters:
<Mode>
AUTO | STEP
AUTO
Each trigger event triggers a complete list cycle. Possible trigger
settings for
:LIST:TRIGger:SOURce
are
AUTO
,
SINGle
and
EXT
.
STEP
Each trigger event triggers only one step in the list processing
cycle. The list is processed in ascending order.
*RST:
AUTO
Example:
LIST:MODE STEP
selects step-by-step processing of the list.
Manual operation:
See
[:SOURce<hw>]:LIST:POWer
<Power>
Fills the
Level
part of the selected list with data.
*RST
does not affect data lists.
SOURce Subsystem
