Remote Control Commands
R&S
®
SMB100A
370
Operating Manual 1407.0806.32 ─ 21
[:SOURce<hw>]:LIST:SELect
<Filename>
Selects the specified list. If a new list is to be created, the name can be entered here.
The list is created if it does not yet exist. The list selected here is available for the fur-
ther processing steps (editing) and is used in the instrument when the list mode is acti-
vated.
The files are stored with the fixed file extensions
*.lsw
in a directory of the user's
choice. The directory applicable to the command is defined with the command
MMEMory:CDIR
. A path can also be specified in which case the list mode file in the
specified directory is selected.
*RST
does not affect data lists.
Parameters:
<Filename>
'<list name>'
Example:
LIST:SEL '/var/list3'
selects
list3
for editing.
Manual operation:
See
"List Mode Data... - List Mode"
[:SOURce<hw>]:LIST:TRIGger:EXECute
Starts the processing of a list in list mode. It corresponds to the manual-control com-
mand "Execute Single."
Example:
SOUR:LIST:TRIG:EXEC
triggers the processing of the selected list.
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:LIST:TRIGger:SOURce
<Source>
Selects the trigger source processing lists.
The names of the parameters correspond to those under sweep mode. SCPI uses
other names for the parameters; these names are also accepted by the instrument.
The SCPI names should be used if compatibility is an important consideration. An
overview of the various names is given in the following table:
R&S name
SCPI name
Command under manual con-
trol
AUTO
IMMediate
MODE AUTO
SINGle
BUS
MODE SINGLE
or
STEP
EXTernal
EXTernal
MODE EXT TRIG SINGLE
or
EXT TRIG STEP
SOURce Subsystem
