542
Appendix A
Command Reference
SXCX
Signal-From-Content Aperture Map
Class
Format parameter setting - HDMI active video
Description
Sets the proper parameters to values necessary to fit CXAR-shaped image content to the
SXAR-shaped aperture of the signal interface timing format.
Upon executing this command, the following actions are performed:
1. The EXAR value is set to the CXAR value (EXAR=CXAR).
2. The EXCX value is set to 0 (EXCX=0).
3. The SXEX value is set to value entered for this command (SXEX=SXCX).
Command syntax
SXCX
code
code
0 to 131071 (in decimal)
Note: For help in determining the proper mapping code, follow the procedure on page 318
(
EXCX
command).
Related commands
SXEX
,
EXAR
,
EXCX
,
CXAR
,
SXCX
,
SXAR
Example
SXCX 264 //Use centered shrink w/black bars top & bottom
FMTU
Summary of Contents for 802BT
