Quantum Data 802BT User Manual Download Page 177

Page: 177 / 744

802BT/802R Video Test Generator User Guide

167

EDID testing for source devices

The generator can emulate an HDMI/DVI sink (display) in order to test HDMI source

devices.

Testing response of source to EDID

The analyzer can emulate different HDMI/DVI displays using a built-in, configurable EDID

structure. With this capability an HDMI/DVI source device can be tested for its ability to

handle an EDID structure received from virtually any DDC-compatible display. You first

have to configure the generator to support the HDMI/DVI signal source and enable

measuring of internal signals. You then configure the EDID in accordance with a particular

display. Use the following procedures.

To set up the generator to perform HDMI/DVI testing:

1. Hold down the

and

keys, and then power on the generator.

The following message appears on the front panel LCD.

2. Release the

and

keys.

The generator is placed in Digital Friendly mode.

3. Hold down the

and

ACS

keys, and then cycle the power to the generator.

The following message appears on the front panel LCD.

4. Hold down the

Step

and

keys while starting the genertor, until

Status display

appears on the LCD.

Special: keys
Digital friendly

Special:

keys

hot-plug formats

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands