Quantum Data 802BT, User Manual

Page: 734 / 744

724 Appendix C Error Messages
4000-4999 Test sequence errors
4000 Invalid format name
The test sequence contains one or more steps that have an invalid format name
parameter.
4001 Invalid image name
The test sequence contains one or more steps that have an invalid image name
parameter.
4002 No sequence memory
There is not enough unused edit buffer memory space available to start a new test
sequence editing session.
4003 Sequence memory full
There is not enough free battery backed user storage memory to save the sequence that
is in the edit buffer.
4004 Sequence not found
A test sequence of the given name could not be found in the user storage memory area.
4005 Sequence editor running
The current firmware does not allow a new test sequence editing session to be started
while the current test sequence editing session is still running.
4006 No sequence to save
An attempt was made to save the contents of a test sequence editing buffer when there
was no open test sequence editing session to save.
4007 Sequence buffer full
No more steps can be added to the current sequence being edited because no more edit
buffer space is available.
4008 Invalid delay setting in sequence
The test sequence contains one or more steps that have a negative number for the step
delay time.
4010 Font index out of range
An attempt was made to use a font at an index location that is less than zero (0) or greater
than the highest index number in use.