Quantum Data 802BT User Manual Download Page 647

Page: 647 / 744

802BT/802R Video Test Generator User Guide

637

Method

On monitors with a single (static) focus adjustment, adjust the control for the best average

focus over the entire screen. The focus at certain locations of the screen should be within

specified limits.

Some monitors have a static and one or more dynamic focus controls. The sequence for

adjusting them and the areas of the screen that they affect depend on the monitor under

test.

Focus_Cx

Description

In the primary version (shown below), the screen is filled with white Cx characters on a

black background. The secondary version is drawn with black characters on a white

background.

Test

Focus adjustments

Purpose

An out-of-focus monitor displays fuzzy graphic images and poorly formed, hard-to-read

text characters.

Method

On monitors with a single (static) focus adjustment, adjust the control for the best average

focus over the entire screen. The focus at certain locations of the screen should be within

specified limits.

Some monitors have a static and one or more dynamic focus controls. The sequence for

adjusting them and the areas of the screen that they affect depend on the monitor under

test.

Summary of Contents for 802BT









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands

Quantum Data 802BT, User Manual

Search results

Summary of Contents for 802BT

Reviews:

Related manuals for 802BT

Brands by name

Popular brands